Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Spatial patch structure and adaptive strategy for desert shrub of Reaumuria soongorica in arid ecosystem of the Heihe River Basin

In many arid ecosystems, vegetation frequently occurs in high-cover patches interspersed in a matrix of low plant cover. However, theoretical explanations for shrub patch pattern dynamics along climate gradients remain unclear on a large scale. This context aimed to assess the variance of the Reaumuria soongorica patch structure along the precipitation gradient and the factors that affect patch structure formation in the middle and lower Heihe River Basin (HRB). Field investigations on vegetation patterns and heterogeneity in soil properties were conducted during 2014 and 2015. The results showed that patch height, size and plant-to-patch distance were smaller in high precipitation habitats than in low precipitation sites. Climate, soil and vegetation explained 82.5% of the variance in patch structure. Spatially, R. soongorica shifted from a clumped to a random pattern on the landscape towards the MAP gradient, and heterogeneity in the surface soil properties (the ratio of biological soil crust (BSC) to bare gravels (BG)) determined the R. soongorica population distribution pattern in the middle and lower HRB. A conceptual model, which integrated water availability and plant facilitation and competition effects, was revealed that R. soongorica changed from a flexible water use strategy in high precipitation regions to a consistent water use strategy in low precipitation areas. Our study provides a comprehensive quantification of the variance in shrub patch structure along a precipitation gradient and may improve our understanding of vegetation pattern dynamics in the Gobi Desert under future climate change.

     

南极中山站全天信息采集系统

南极高原拥有独特的天文观测优势,为了对南极中山站夜天文观测条件进行实测研究,中国科学院云南天文台专门研制了一套具有耐低温、自动除雪除霜等适应南极气候特征的全自动全天信息采集系统,该系统可以提供实时的全天云量、天光背景和全天图像,并将信息推送到网页实时显示。介绍了系统的研制及为适应南极气候进行的耐低温实验,统计分析了中山站2016~2017年的全天信息数据,结果显示,中山站2016和2017年的可观测时间为772.21 h和437.38 h,可观测夜数为93 d和51 d,天光背景最大真实值为22.05 Mag/arcsec 2,年平均气温为-10.6℃,最高气温19.1℃,最低气温为-44℃,2016年平均相对湿度为55.2%。     

海水中铯-137的γ能谱测量不确定度评估

为科学评价测量结果的可靠性，对海水中137Cs γ能谱分析方法的不确定度进行了评估。根据《化学分析中不确定度的评估指南》，分析不确定度的来源并逐一对各不确定度分量进行了量化，最终计算了合成相对标准不确定度。结果表明，影响海水中137Cs γ能谱测量不确定度的因素分别为样品源137Cs峰区计数、标准源活度、取样体积、化学回收率、本底137Cs峰区计数及标准源137Cs峰区计数，其中样品源137Cs峰区计数的不确定度贡献最为突出。对于137Cs活度浓度为1.28 mBq/L的海水样品，其合成相对标准不确定度为9.78%。     

基于纹理特征的围填海SAR图像分水岭分割方法

本文提出了一种基于纹理特征的围填海SAR图像分水岭分割方法,首先对机载MiniSAR图像进行灰度共生矩阵纹理滤波,获得纹理特征图像,再对纹理特征图像进行分水岭算法分割,将获得的形态学重建图像进行门限阈值分割,得到最后的二值化分割结果。该方法一方面通过调整灰度共生矩阵纹理滤波的窗口大小,抑制了斑点噪声的影响;另一方面,利用分水岭算法对边缘模糊杂乱图像的优势,提高了围填海信息提取的准确性。实验结果表明,本方法对高分辨率SAR图像围填海监测图像的分割效果良好。     

珠江口淇澳岛滨海湿地沉积环境演化及其对人类活动的响应

滨海湿地作为人类活动和全球变化反应最为敏感的区域，其沉积记录可以反映出周边地区环境变化及人类活动信息。珠江口淇澳岛滨海湿地钻孔分析结果表明，在中全新世期间淇澳岛附近海域为河口湾环境，在风化层以上开始出现淤积，但在4 200 a BP前后受极冷气候的影响，沉积物粗化；自2 500 a BP以来，沉积环境相对稳定，在小冰期期间略有变化。沉积速率计算结果显示:淇澳岛附近海域自中全新世高海面以来的平均沉积速率为0.29 cm/a，4 160~2 500 a BP、2 500 a BP-1488年、1488-1893年、1893-1986年、1990-2007年期间的平均沉积速率分别为:0.17 cm/a、0.23 cm/a、0.35 cm/a、1.37 cm/a和5.94 cm/a，沉积速率逐渐增大，反映了珠江三角洲演化过程中沉积相与沉积环境的变化；1986-1990年期间的海堤建造极大地扰动了该钻孔上部的沉积过程，在工程施工期间共沉积了厚度约112 cm的沉积层，而在海堤建成后，沉积速率也显著增大。沉积物总有机碳、总氮和C/N值的垂向分布表明，在4 160~2 500 a BP期间受海洋环境影响较大，沉积物中有机碳以海源为主，2 500 a BP以来沉积物中碳、氮含量明显增大，C/N也相应变大，有机碳主要来源于陆源输入，但在小冰期期间海源有机碳贡献略有所增大；近百年来由于受人类活动影响显著，陆源有机碳的贡献快速增加。     

烟台市地质灾害发育现状及影响因素分析

2016年山东省开展各市地质灾害排查工作,烟台市作为地质灾害较发育区,是该次排查重点工作区之一。该文以现状调查为基础,查明了烟台市共发育471处地质灾害隐患点,地质灾害规模以小型为主,主要类型为崩塌、滑坡、泥石流、采空塌陷和岩溶塌陷,其中崩塌隐患点占地质灾害总数的68%,数量最多,其次为泥石流和采空塌陷,各占总数的15%和14%,滑坡数量最少,仅占总数的1%,并介绍了各类地质灾害分布特征。在此基础上,对地质灾害的主要影响因素——地形地貌、岩土体类型、地质构造、降水和人类工程活动等进行了分析。最后提出了在进行工程建设活动的同时重视其引发的地质灾害问题,以减少和预防其带来的次生地质灾害。     

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.     

环塔里木盆地绿洲城市发展与水环境质量协调度

解决好新疆环塔里木盆地绿洲城市发展与水环境质量之间的关系，对"一带一路"倡议顺利实施及新疆社会稳定具有十分重要的作用。基于2004-2017年环塔里木盆地绿洲城市发展与水环境变化状况，构建城市发展与水环境质量的综合评价模型及二者的协调度模型，以探讨环塔里木盆地绿洲城市发展、水环境质量变化及二者的协调关系。结果表明：2004-2017年，（1）环塔里木盆地绿洲城市发展综合指数呈现出逐年稳定上升的趋势，经济发展和城镇空间规模扩大是环塔里木盆地绿洲城市发展的主要形式；（2）环塔里木盆地绿洲城市的水环境质量综合指数呈现出逐年降低的趋势，水环境质量形势严峻；（3）环塔里木盆地绿洲城市发展-水环境质量系统的协调度呈现倒U型的稳定发展趋势，但总体上两者的协调度较低，城市发展和水环境质量之间的矛盾日益突出。     

Effects of stocking density on the growth and immunity of Atlantic salmon salmo salar reared in recirculating aquaculture system (RAS)

Atlantic salmon reared in recirculating aquaculture system (RAS) may lead to inappropriately high stocking density, because fish live in a limited space. Finding the suitable stocking density of Atlantic salmon reared in RAS is very important for RAS industry. In this paper, the influence of stocking density on growth and some stress related physiological factors were investigated to evaluate the effects of stocking density. The fish were reared for 220 days at five densities (A: 24 kg/m³; B: 21 kg/m³; C: 15 kg/m³; D: 9 kg/ m³ and E: 6 kg/m³ ). The results show that 30 kg/m³ might be the maximum density which RAS can afford in China. The stocking densities under 30 kg/m³ have no effect on mortality of Atlantic salmon reared in RAS. However, the specific growth rate (SGR), final weight and weight gain in the high density group were significantly lower than the lower density groups and middle density groups. Moreover, feed conversion rate (FCR) had a negative correlation with density. Plasma hormone T₃ and GH showed significant decrease with the increase of the stocking density of the experiment. Furthermore, thyroid hormone (T₃), GH (growth hormone) activities were decreased with stocking density increase. However, plasma cortisol, GOT (glutamic oxalacetic transaminase) and GPT (glutamic pyruvic transaminase) activities were increase with stocking density increase. And the stocking density has no effects on plasma lysozyme of Atlantic salmon reared in RAS. These investigations would also help devise efficient ways to rear adult Atlantic salmon in China and may, in a way, help spread salmon mariculture in China.